ما رأيك؟
أقسام الموقع
القائمة البريدية
التصويت: مؤتمر التخطيط الافتراضي والمدن الاليكترونية
للكاتبين HOSNY M. SOGHAIR AND MAHMOUD H. AHMED
ATIF M. ABDEL-HAFEZ AND AHMED IBRAHIM H. RAMADAN
Department of Civil Engineering, Assiut University
ABSTRACT:
Fiber reinforced plastic (FRP) jacketing has emerged as an effective way to retrofit concrete
columns in recent years. The existing experimental work on FRP confined concrete column is
mainly concentrated on concrete columns under concentric loading. Therefore, this research
involves the study of nonlinear finite element analysis of FRP confined square and
rectangular R.C. columns under both axial compressive and lateral loads. Lateral load was
taken as a ratio of the axial compressive loads "H/ Pc". The effects of the FRP layer number,concrete compressive strength, percentage of main steel, rectangularity of columns and
various ratios of lateral loads to centric load on FRP confined concrete columns were
investigated theoretically. The results of this work were compared with previous work [1]considered the behavior of square and rectangular columns confined with CFRP under centric
loads. All studied columns were modeled using the nonlinear finite element analysis. The
main variables studied were the cross-section shape of the column “R”, concrete grade “C”,the percentage of area of the main longitudinal steel “As%” and the number of layers ofCFRP sheet “
NL”. The FEM results indicated that R.C. columns externally wrapped withCFRP sheet showed a significant improvement in both capacity and ductility.
[إقرأ الملف]
ملاحظات (0 تم ارسالها)
