ON THE EXPERIMENTAL MECHANICAL BEHAVIOUR OF GLASS / POLYESTER

  • email ارسل لصديقك
  • print نسخة للطباعة
  • Add to your del.icio.us del.icio.us
  • Digg this story Digg this

ما رأيك؟

(عدد 1 صوت)

أقسام الموقع

فهرس المواضيع

ن ث ع خ ج س ح
12
3456789
10111213141516
17181920212223
24252627282930

القائمة البريدية

التسجيل في قائمة المراسلات

التصويت: الازمة المالية العالمية

ماهو اثر الازمة الاقتصادية العالمية على التطور العمراني والعقار بالعالم العربي؟

ضبط حجم الخط: Decrease font Enlarge font
image

للكاتبين :

El-HABAK A.M and IBRAHIM S.S*

Faculty of Engineering, Cairo University

*Housing Building Research Center Cairo, Egypt

1. ABSTRACT

A
comparative study of the tensile and compressive behaviour of glass/polyester composite is

presented. All specimens were fabricated as unidirectional rods by a resin transfer moulding

(RTM) technique with fiber volume fraction of 20%, 30% and 41%. The influence of fiber

volume fraction and specimen geometry (diameter) on the composite strength and stiffness as

well as the composite strain under both types of loading are investigated. Experimental results

show that the optimum fiber volume fraction for strength under both the tensile and the

compressive load is 30%.


[إقرأ الملف]
  • email ارسل لصديقك
  • print نسخة للطباعة
  • Add to your del.icio.us del.icio.us
  • Digg this story Digg this

إضافة تعليق على الموضوع comment ملاحظات (0 تم ارسالها)

مواضيع متميزة

Powered By Arabic CMS Media Version By ArabNas.com