DESIGN AND OPERATIONAL CHARTS OF NEW POWER ASSIST AND SEPARATE SHAFT TURBOCHARGER SYSTEM

  • email ارسل لصديقك
  • print نسخة للطباعة
  • Add to your del.icio.us del.icio.us
  • Digg this story Digg this

ما رأيك؟

(عدد 1 صوت)

أقسام الموقع

فهرس المواضيع

ن ث ع خ ج س ح
1234
567891011
12131415161718
19202122232425
262728293031

القائمة البريدية

التسجيل في قائمة المراسلات

التصويت: الازمة المالية العالمية

ماهو اثر الازمة الاقتصادية العالمية على التطور العمراني والعقار بالعالم العربي؟

ضبط حجم الخط: Decrease font Enlarge font
image

 للكاتبين :

R. M. Abd El-Maksoud and N. N. Bayomi

Faculty of Eng. Mataria, Helwan University,Cairo, EGYPT

ABSTRACT

The present paper introduces a new power assist and separate shaft turbocharger system. Such

system is configured as the compressor attached to an electric motor while the turbine is

connected to a generator through a clutch. The compressor shaft is connected to the turbine

through another clutch. The two clutches are used to operate the system in power assist or

separate shaft modes according to turbo-charging requirements.

In this paper, demonstrative operational charts of turbocharger turbine and compressor for

two operating modes are presented. Such charts are derived using mathematical procedures

that are recommended to be followed in making a preliminary design of the two turbocharger

components. The procedures are utilized to verify the inlet and exit flow parameters for both

turbine and compressor. The approach enables the process designer to quickly and

realistically estimate different parameters and flow variables. The operating conditions are

solely dependent upon the exhaust gas power as well as the percentage of power assistance

when the turbocharger operates in the power assist mode.


[إقرأ الملف]
  • email ارسل لصديقك
  • print نسخة للطباعة
  • Add to your del.icio.us del.icio.us
  • Digg this story Digg this

إضافة تعليق على الموضوع comment ملاحظات (0 تم ارسالها)

مواضيع متميزة

Powered By Arabic CMS Media Version By ArabNas.com